CALL NOW
Fire & Smoke Restoration

From fire and smoke impact to documented recovery.

Fire events affect structure, contents, air quality, and odor simultaneously. Our process documents every affected area and system — prioritizing stabilization, controlled cleanup, and a clear path to reconstruction.

CALL NOW

Fire & Smoke Restoration

What fire and smoke affects

Structural Materials

Fire-affected framing, drywall, subfloor — scope determines salvageability

Contents / Belongings

Smoke penetration and soot deposition on furnishings, textiles, and hard surfaces

HVAC / Air Systems

Smoke and soot distribution through duct systems from the fire event

Odor Penetration

Smoke odor absorbed by porous materials — requiring targeted deodorization protocol

Process

Restoration process

Systematically documented at every step. Evidence collected from assessment through verified completion.

1
Assessment & StabilizationImmediate

Affected areas identified. Property stabilized (board-up, tarping) where structural compromise exists.

2
Contents DocumentationAssessment

Affected contents inventoried, photographed, and categorized — salvageable vs. loss.

3
Smoke & Soot RemovalCleanup

Surfaces cleaned per smoke category and material type. HEPA filtration deployed throughout.

4
Odor MitigationCleanup

Treatment applied to porous materials. Deodorization protocol for structural and content items.

5
Documentation PackageCompletion

Photo sequence, contents inventory, scope letter, and adjuster package prepared.

6
Reconstruction HandoffCompletion

Scope letter identifies materials requiring replacement. Reconstruction scope defined.

Technical Evidence

Impact assessment — all affected areas

Smoke impact mapped across all zones. Contents inventoried. Odor penetration assessed per material type.

SMOKE IMPACT CLASSIFICATIONIMP %
Fire Room98%
Critical
Adjacent81%
Affected
Hallway67%
Affected
Bedroom44%
Monitor
HVAC Duct58%
Affected
Upstairs22%
Monitor

Visual pattern — not actual Steamaster project data · SoT gate applies

KEY MEASUREMENTS

Origin

Zone A

Fire origin identified

Smoke

5 zones

Smoke impact mapped

Contents

Inv.

Inventoried and categorized

Status

Active

Restoration protocol active

RESTORATION EQUIPMENT
HEPA filtration units
Thermal fogger — targeted application
Soot sponge array
Odor counteractant system

Equipment staged per project scope

Inspection / Equipment Photo@steamaster/media · fire-smoke-tech-photo

Documentation

Documentation package for every affected area.

Scope letter, photo set, and contents inventory structured for adjuster review. Reconstruction scope is identified in the documentation — restoration and reconstruction are separate phases.

Scope letter

Written scope of all affected areas and materials.

Photo evidence set

Sequenced photography — all affected areas and contents.

Contents inventory

Affected items inventoried and categorized — salvageable vs. loss.

Adjuster package

Photo set, scope letter, and inventory in adjuster-ready format.

Project Proof

Before — Project Photo Slot@steamaster/media · fire-smoke-proof-1
PROJECT DOCUMENTATION · SoT GATE · PENDING VERIFICATION
During / After — Project Photo Slot@steamaster/media · fire-smoke-proof-2
PROJECT DOCUMENTATION · SoT GATE · PENDING VERIFICATION

Reviews

AWAITING VERIFICATION
AWAITING VERIFICATION
AWAITING VERIFICATION

FAQ

Common questions

FIRE & SMOKE RESTORATION

Ready to begin.

Contact us to schedule an inspection. Our technicians will assess, document, and build a plan before any work begins.

CALL NOW